You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
Version 1
Current »
This table lists the text reasons that can be sent in tag 58-Text of the Session Level Reject message when an iLink message from a client system does not pass CME Globex session-level validation.
| Session Layer Validation | Tag 58-Text |
|---|
|
|
|---|
Tag 8-BeginString | - BeginString (8) tag is not present
- BeginString (8) tag has an incorrect value, should be FIX4.2
|
Tag 9-BodyLength | - BodyLength (9) tag is not present
- BodyLength (9) tag has an incorrect value: should be ( )
|
Tag 35-MsgType | - Could not extract message type.
- UNKNOWN Message received. Message Type = ( )
|
Tag 34-MsgSeqNum | In session logon message must have 34=1. Logout forced. |
Tag 49-SenderCompID | - "SenderCompId (49) tag is not present"
- "Invalid SenderCompID (49) tag. Logout forced."FTI
Received invalid fault tolerance indicator = ( ) Logout forced.
if LOGGED_OFF and if Msg Type is Logon (A) and FTI is (not U or N) or Null then - Invalid logon. Logout forced.
- Received initial logon message with Primary Indication = ( ) + Expected U or NThis message comes from backup:
- Received invalid fault tolerance indicator = ( ). Expected Bif logged off and MsgType is non logon msg then:
Non logon message received while not logged on.
|
Tag 50-SenderSubID | - SenderSubId (50) tag is not present
- Business Reject: Other '50 (SENDER_SUB_ID) length: 1 min: 2'
- tag SenderSubID (50) can contain only alphanumeric values
|
Tag 52-SendingTime | - SendingTime (52) tag is not present
- SendingTime (52) tag is not formatted properly ( )
|
Tag 56-TargetCompID | - TargetCompId (56) tag is not present
- TargetCompId (56) tag has an incorrect value: ( ) should be CME
|
Tag 57-TargetSubID | - TargetSubId (57) tag is not present
- TargetSubId (57) tag has an incorrect value: ( ), should be G
|
Tag 142-SenderLocationID | SenderLocationId (142) tag is not present |
|
|
| 10-CheckSum | Invalid FIX message. Checksum tag not found. |
|
|
|---|
If tag 43-PossDupFlag=Y (resend), then check:
tag 122-OrigSendingTime | - Cannot have an Original Sending Time field on an initial logon. Logout forced.
- In-session logon may not include OrigSendingTime field. Logout forced.
|
Tag 96-RawData | Invalid logon. Logout forced. |
Tag 141-ResetSeqNumFlag | - Cannot have Reset Sequence Number Flag=Y during initial logon. Logout forced.
- In session logon message must have 141=Y. Logout forced.
|
Tag 108-HeartBtInt | - Error during logon. Heartbeat tag invalid.
- Error during logon. Heartbeat value invalid. Received: ( ), expected value in range 5-999
|
| All messages EXCEPT: Cross Request (tag 35-MsgType=s), Quote Request(tag 35-MsgType=R) |
Tag 11-ClOrdID | - ClOrdID (11) tag is not present
- Last 8 characters of tag ClOrdID (11) cannot contain spaces only
|
|
|
|---|
| tag 1-Account | For Access Manager: this account is prevented from trading this physically delivered contract 150 days before the last trading day |
|
|
|---|
Tag 37-OrderID | OrderID (37) must be present on a Cancel or Cancel Replace Request. |
|
|
| tag 38-OrderQuantity | - OrderQty (38) must be present on a New Order or Cancel/Replace Request.
- For Globex Credit Controls (GC2): Credit Limit Violation: Order Quantity x exceeds Clip Size: y.
|
| Position Limit Violation for Account: <Account>, Position Increase: <position> makes position above the BUY Position Limit: <Limit> by amount: <Amount>. Limit set by CMF for Product Code: <Product Code> Position Limit Violation for Account: <Account>, Position Increase: <position> makes position above the BUY Position Limit: <Limit> by amount: <Amount>. Limit set by EF for Product Code: <Product Code> Pre-Trade Registration Violation: Account: <Account> is not Registered for this Executing Firm Pre-Trade Registration Violation: Account: <Account> is not Registered to Trade Product Code: <Product Code> Pre-Trade Registration Violation: Account: <Account> is not Registered to Trade UDS Covereds Pre-Trade Registration Violation: Account: <Account> has been Suspended from Trading by the CMF for this Executing Firm
|
| tag 1031-CustOrderHandlingInst | - Required Field Missing 'Missing field: 'CustOrderHandlingInst (1031)'
- Invalid FIX Field: 1031=<null>
- tag CustOrderHandlingInst (1031) contains invalid value: <>
- Invalid FIX Field: 1031=<null>
|
If the quantity is present in tag 210-MaxShow, then check:
tag 59-TimeInForce | Display Quantity orders may not include Fill and Kill (FAK)/ Fill or Kill(FOK) |
|
|
| - Exceeded maximum number of unacknowledged OSR requests.
- Order Status Not Found.
- CltOrdId (11) tag is not present.
|
|
|
|---|
Tag 7-BeginSeqNo & Tag 16 | - Invalid BeginSeqNum. Integer required. /Invalid EndSeqNum. Integer required.)
- Error. Received new Resend Request while already processing a Resend Request.
- Invalid BeginSeqNum or EndSeqNum. Cannot be greater than last seq num sent.
- Invalid BeginSeqNum. Cannot be less than 1.
- Invalid EndSeqNum. Cannot be less than 0.
- Range of messages to resend is greater than maximum allowed ( )
- "BeginSeqNo is greater than EndSeqNo."
|
|
|
|---|
| tag 1031-CustOrderHandlingInst | Invalid FIX Field: 1031=<null> |
| Volume Controls initiated Reject due to exceeding Mass Quote Message limit. Current TPS: #### Volume Controls initiated Reject. Current TPS:#### |