Asset Attribute Type Values
Enumeration | Description |
---|---|
DeliveryPoint | Physical delivery point |
DeliveryMethod | Method of delivery of the commodity. |
EmissionsYear | Year for emissions trading. |
Grade | Grade of the commodity to be delivered. |
QualityVariationAdjustment | When value is "Y" Quality Variation Adjustment is applicable. |
SpecialCondition | Free-form description of condition. |
TransferTerms | Terms for physical transfer |
Ash | The ash content of a coal product. |
AshFusionTemperature | The temperature at which the ash form of a coal product fuses completely in accordance with the ASTM International D1857 Standard Test Methodology. |
BTUperLB | The number of British Thermal Units per Pound of a coal product. |
BTUQualityAdjustment | The Quality Adjustment formula to be used where the Actual Shipment BTU/Lb value differs from the Standard BTU/Lb value. |
FinesPassingScreen | Coal fines (% by weight) passing 1/4 inch screen. |
Fluid | The temperature at which the ash cone flattens. |
Grindability | The Hardgrove Grindability Index value of a coal to be delivered. |
InitialDeformation | The temperature at which an ash cone shows evidence of deformation. |
Moisture | The moisture content of a coal product. |
SCoTASpecification | When value is "Y", the type and source of coal refer to global SCoTA specifications. |
SO2 | The sulphur dioxide content of a coal product. |
SO2QualityAdjustment | The Quality Adjustment formula to be used where the Actual Shipment SO2/MMBTU value differs from the Standard SO2/MMBTU value. |
SofteningHeightHalfWidth | The temperature at which the height of an ash cone equals half its width. (Hemisphere temperature). |
SofteningHeightWidth | The temperature at which the height of an ash cone equals its width. (Softening temperature). |
Sulphur | The sulphur content of a coal product. |
TopSize | The smallest sieve opening that will result in less than 5% of a sample of a coal product remaining. |
Volatile | The volatile content of a coal product. |
DeliveryQuality | Delivery quality of electricity, whether "firm" or "not firm". Value field takes one of the following values: 0 = Not firm; 1 = Firm |
LoadShapeForced | When value is "Y" it indicates that the electrical load settlement shape is forced. |
Voltage | The voltage of the electricity to be delivered. |
CalorificValue | The calorific value of the gas to be delivered specified in megajoules per cubic meter. |
GasQuality | The quality of the gas to be delivered. |
ApplicableLaw | For U.S. Emissions Allowance Transactions this is used to specify the applicable emissions law when this is not defined in Emissions Product Definitions. |
ComplianceStartYear | For E.U. Emissions Allowance Transactions this describes the specified compliance period start year for which the allowances are issued. |
ComplianceEndYear | For E.U. Emissions Allowance Transactions this describes the specified compliance period end year for which the allowances are issued. |
EEPApplicable | When the value is "Y", Excess Emission Penalty is specified to be applicable in the confirmation then the Excess Emission Penalty will be determined in the manner specified in the confirmation. |
EEPEquivalentApplicable | When value is "Y", the EEP Equivalent is applicable. See Part [7] definition of EEP Equivalent. |
EEPPenaltyApplicable | When value is "Y", the Excess Emissions Penalty. is applicable. See Part [7] definition of Excess Emissions Penalty. |
EEPRiskStartDate | The start date used to determine how provisions in Part [7] Page 7 (B) Failure to Deliver Not Remedied are to be applied. |
EEPRiskEndDate | The end date used to determine how provisions in Part [7] Page 7 (B) Failure to Deliver Not Remedied are to be applied. |
FailureToDeliverApplicable | For EU Emissions Allowance Transactions this holds the failure to deliver (alternative method) election. Used to determine how provisions in Part [7] Page 7 (B) Failure to Deliver Not Remedied are to be applied. |
SchemeAbandonment | For U.S. Emissions Allowance Transactions specifies terms which apply in the event of an abandonment of scheme event. |
TrackingSystem | For U.S. Emissions Allowance Transactions this is used to specify the tracking system when this is not defined in Emissions Product Definitions. |
BrandCountry | Country where brand is produced. |
BrandManager | Brand name manager. |
BrandName | Brand name of the metal. |
BrandProducer | Producer of brand. |
Shape | Physical shape(s) of the metal. |
AdjustmentFallback | When value is "Y" it indicates that adjustment to the fallback weather station is appropriate. |
AlternateProvider | When value is "Y" it indicates that an alternate data provider is acceptable. |
FinalEditedData | When value is "Y" it indicates that provider?s data is final. |
SynopticFallback | When value is "Y" it indicates that synoptic data fallback is acceptable. |
How was your Client Systems Wiki Experience? Submit Feedback
Copyright © 2024 CME Group Inc. All rights reserved.