...
For more details to trade CME Group products via this connectivity method, contact your Globex Account Manager (GAM).
CME EConnect - NY5 connectivity provides access to:
...
Contents
| Table of Contents |
|---|
Handoff Specifications
- 1 Gbps hand-off
- 10 Gbps hand-off
- Single Mode Fiber
- 1G-LR (1GBASE-LH)
- 10G-LR (10GBASE-LR)
- 1310nm wavelength
...
Figure: EConnect NY5 Connectivity
CME Globex EConnect Connectivity Procedures
Upon successful validation of the cross connect and site acceptance by CME Group, the customer is responsible for the following procedures:
- Activating the multicast stream
- Configuring the customer application on the arbitration server
- Configuring routers
- Configuring the rendezvous point’s IP address
- Configuring a fixed path between each router and corresponding CME data center
- Validating that the listener server is receiving data from the correct source
Routing Requirements
Customer routers must be capable of using advanced TCP/IP Protocols including BGP and multicast, specifically PIM Sparse Mode.
- BGP routing must be used on the routers terminating CME Group connections.
- It is recommended that customers use a routing protocol between their routers to provide automatic failover.
- All IP packets destined for CME Group must be sourced from CME Group-assigned private address space.
- Multicast PIM Sparse Mode must be used.
Restrictions
The following restrictions apply to connectivity:
...